Mini Steam Power Plant
OSC77FD120TH
Features
-This is a bench top unit for a small low cost miniature power plant designed for educational purpose-A small gas fired boiler supplies steam to a single cylinder, double acting reciprocating engine
-A small DC generator is connected to the engine by a belt and an electrical load is applied using small light bulbs
-Exhaust from the steam engine is condensed in a water cooled condensor
-Condensate is collected for weight measurement and is returned to feed water tank
-A manual feed pump supplies feed water to the boiler
-Instruments are provided for monitoring and controlling the plant operation and performance as well as for safety
Typical Experiments
-Fuel consumption-Efficiencies for boiler, engine, and overall plan
-Condenser heat transfer coefficient
-Heat balance and energy unilization
Model | OSC 77FD120TH | |||||||
Boiler | Type : Fire tube vertical boiler | |||||||
Capacity : Upto 5kg/hr steam, Upto 5 bar. | ||||||||
Boiler accessories | Safety valve, level gauge | |||||||
Fuel | Liquefied Petroleum Gas (LPG) | |||||||
Fuel tank | 4kg with pressure regulator (option) | |||||||
Feed water tank | Stainless steel with level gauge | |||||||
Feed pump | Hand operated | |||||||
Steam engine | Single cylinder, bore 19mm, stroke 19mm providing upto 4500mW mechanical power | |||||||
output from 5 kg/hr steam at 5 bar. | ||||||||
Electrical power system | DC generator with a lamp load bank | |||||||
Condenser | Shell an tube type | |||||||
Instrumentation | Pressure - Boiler steam | |||||||
Temperatures - Ambient air, Boiler feed water, Boiler steam, Engine steam inlet, | ||||||||
Engine steam outlet, Condensate, Cooling water inlet, Cooling water outlet | ||||||||
Flow meters - Rotameter for fuel gas, Rotameter for condenser cooling water | ||||||||
Engine speed sensor and indicator | ||||||||
Electrical power - Digital voltmeter and digital ammeter | ||||||||
Power supply | 220V, 1Ph, 50Hz. Other power supply is available on request | |||||||
Size (WxLxH) | Approx. 760 x 900 x 1550mm@(including a table) | |||||||
Weight | Approx. 90kg |
100TH-021 | Digital flue gas analyzer for O2 and CO contens | |||||||
101TH-031 | Pressure sensor | |||||||
120TH-003 | Mechanical dynamometer with load cell, and torque indicator for measurement of mechanical | |||||||
power out put | ||||||||
120TH-003A | Mechanical dynamometer with spring balance, and weight for measurement of mechanical | |||||||
power out put | ||||||||
120TH-020 | Analog to digital signal converter with software for display of pressures, temp eratures, steam rate, | |||||||
fuel flow rate, cooling water, flow rate, voltage, and current on computer (option) | ||||||||
120TH-032 | Fuel flow sensor | |||||||
120TH-035 | Cooling water flow sensor | |||||||
120TH-037 | Condensate weight totalizer |