Shell and Tube Heat Exchanger

Shell and Tube Heat Exchanger
OSC77FD211TH

Features

-The appratus is used for studying heat transfer through a shell and tube heat exchanger under parallel or counter flow conditions
-The unit consists of a shell and tube heat exchanger, hot water tank with a transfer pump, instruments for monitoring and control
-Parallel and counter flow is selected by cold water control valves

Typical Experiments

-Study of heat transfer under parallel and counter flow at various rates of flow and temperature differences
-Heat transfer coefficient at various rates of flow and temperature differences

Specifications
Model		OSC 77FD 211TH
Construction		Insulated stainless steel shell with 7 stainless steel inner tubes
		Total heat transfer area over 600cm2
Temperature sensor		4 ea for hot and cold water inlets and outlets
		1 ea for hot water tank
A service module		A hot water pump
		A stainless steel hot water tank with a level switch to prevent heater operation
		if level is too low
		Heater : 3000W
		2 sets of temperature indicator with selector switch
		Temperature control unit to limit temperature of hot water to not more than 80℃
		Flow meters : Hot water 0.4 to 4L/m, Cold water 1 to 7L/m
Power supply		220V 1Ph 50Hz. Other power supply is available on request
Size (W x L x H)		Approx. 650 x 1400 x 650 mm
Weight		Approx. 65 kg

Shell and Tube Heat Exchanger OSC77FD211TH

Shell and Tube Heat Exchanger
OSC77FD211TH